两段式热脱焦油煤气炉在环形加热炉上的开发应用

介绍了两段式煤气发生炉热脱焦油煤气在无缝钢管环形加热炉上的开发与应用 ,以及两段式煤气发生炉热脱焦油煤气站的设计和采用热脱焦油煤气代替重油所产生的经济效益     

首钢外购焦炭质量恶化后的高炉生产实践

针对焦炭质量劣化的状况，高炉操作以活跃炉缸为主，从上下部调剂入手，采取疏导煤气、控制合理的实际风速和鼓风动能、缓解焦炭在高温区的粉化等措施，有效地改善了高炉的顺行状况，并逐步恢复高炉指标。     

小浪底水利枢纽的初期运行

总结了小浪底水利枢纽投运初期的水沙情况、孔板洞原型观测试验、调水调沙试验和枢纽的安全监测情况,介绍了大坝防渗、转轮裂纹问题的处理方案,总结了枢纽在防洪、防凌、减淤、供水和发电等方面发挥的作用。试验和对监测资料的分析表明,枢纽运行稳定,孔板洞设计合理、消能效果显著,各部位建筑物性态稳定,发挥了巨大的综合效益。     

速率陀螺稳定电视导引头平台数字控制器设计

采用连续校正网络的等效数字控制器设计方法设计数字校正网络，并选用高速数字信号处理器（DSP）构成稳定回路的数字控制系统。用MATLAB软件对系统进行计算机仿真，仿真结果表明，所设计的数字控制系统能够满足指标要求，从而证明这种设计方法的可行性。     

气缸可靠性试验装置的研制

为了进行气缸可靠性试验研究,针对缸径为50mm、行程为160mm的气缸研制了一套气缸可靠性试验装置.5个月的不间断试验测试及获得的大量数据表明,该装置运行稳定可靠,满足了气缸可靠性试验的要求.详细介绍了装置试验回路的构成、工作原理和具体实现,测控子系统的硬件构成和软件流程,气缸性能参数测量方法及获得的部分数据.     

Short contact time dissolution of vitrinite and inertinite concentrates

The short contact time dissolution of vitrinite and inertinite concentrates of an Australian bituminous coal was studied under isothermal conditions with tetralin as solvent. The reactivity of the two maceral types and the yields and nature of the products were determined for a range of reaction temperatures (400, 420 and 440 °C) and reaction times (2–20 min). The dissolution of vitrinite proceeded at a significantly greater rate than for inertinite and was associated with greater selectivity to soluble non-gaseous products. At very short reaction times (2 min), the vitrinite underwent solubilizing reactions to yield products of higher molecular weight and greater oxygen functionality than was the case for inertinite, for which changes in the chemical nature of the products were negligible over the range of conditions studied. At longer reaction times (5 min), the composition of the vitrinite-derived products was similar to that of the inertinite-derived products.     

�Ĵ������Ȼ�����������б�����Դ̽��

本文应用天然气中甲烷、乙烷的碳同位素,甲烷的氢同位素,汞含量及天然气成分等指标,探讨了四川盆地天然气成因分类;并结合地质情况对气源层进行了探讨。     

含生物功能基团磷脂胆碱的聚乳酸的合成反应

用天然甘油磷脂胆碱开环丙交酯,以获得具有仿生功能的生物降解聚乳酸.采用1H-NMR、FT-IR确证在聚合物结构中引入了生物功能基团磷脂胆碱.通过1H-NMR和GPC测定分子量及其分布,研究了反应时间和温度对聚合物分子量扣产率的影响,聚合物产率达80%以上.将磷脂引入聚乳酸链段中得到可全降解的、生物相容性好的磷脂高分子.这一新的思路可以用于合成一系列新型的药物载体和组织工程支架材料.     

Effects of compressive and tensile stress on the growth mode of epitaxial oxide films

Oxide films were deposited on different substrates by laser molecular beam epitaxy. Reflection high-energy electron diffraction was performed to in situ investigate the change of growth mode and the lattice relaxation during the growth. An asymmetrical phenomenon was found in the two kinds of strain states, compressive stress and tensile stress of heterostructures with different lattice mismatch. In the case of BaTiO₃/SrTiO₃ (2.2%), 2D layer-by-layer growth mode without lattice relaxation can be maintained for a longer period for BTO films on STO with compressive stress, comparing to STO films on BTO with tensile stress. When MgO films were deposited on SrTiO₃ with a large mismatch of 7.8%, compressive stress leads to rapid lattice relaxation with a very thin wet layer, and 3D strained island were observed. As a comparison, SrTiO₃ films on MgO with tensile stress were configured. No RHEED patterns can be observed duo to a large tensile stress.     

缝纫设备输送动力装置的分析

文章介绍了几种缝纫设备输送动力装置的送布原理，认为应针对不同的面料特性及经制工艺要求，选用合适的设备输送系统。